SABINE Graphi-Q2 3122-S - Manual (Page 25)

24
MAIN GRQ REMOTE SCREEN
S
ECTION
E
IGHT
: U
SING
GRQ2 R
EMOTE
S
OFTWARE
Level Indicators
Input, output,
compressor gain/
reduction, and
limiter indicator for
both channels
Click to toggle EQ
boost/cut range
between ± 6 dB
and ± 12 dB.
Click to open
screens for these
parameters.
Graphic EQ link
indicator:
1 line = Relative Link
2 lines = Absolute Link
Low Cut
Slider
High Cut
Slider
Response
Curve Display
Shows response
curve of all
EQ filters
FBX and PARAMETRIC FILTERS SCREEN
Parameter Filter Link
Indicator Scroll Bar
changes values
in selected field
Click & drag the
handle, or click
anywhere in the
bar for quick
editing
GLOBAL PARAMETERS SCREEN
Global Parameter
Link Indicator
Important Note on Equipment Power-on Sequencing and Feedback Suppression
The Graphi-Q2 is similar to a computer in that it requires several seconds to boot up and become
operative. Because of this, the potential exists for feedback to assault your system should you power
up all of your equipment (including the Graphi-Q2) in unison, with volumes set to operating levels.
Therefore, it is wise to consider either one of the following courses:
1. Sequence the power up so that the Graphi-Q2 turns on well ahead of the power amp. Allow
a 5 second time differential for comfort.
2. Set up the Graphi-Q2 to give the signal a boost, and adjust the rest of your gain structure
accordingly. When the Graphi-Q2 is bypassed (or still booting), the signal level will be below the
feedback threshold.
IMPORTANT
Equipment
Power-on
Sequencing to
Avoid Feedback