Condec UPS3210 - Manual (Page 12)

8 UPS3000/UPS3110/UPS3210 Operation & Maintenance Manual
Figure 2-6. UPS3210 Rack-mountable Pressure Indicator Rear View
2.4 Configuration Switch Settings
As normally supplied, the UPS3000, UPS3110 and UPS3210 will be fully calibrated and configured to the
requirements specified by the customer purchase order. However, there are several functions or operational
features that may be selected or altered by the operator during usage. These are controlled by the eight-position
DIP switch, S1, located on the CPU board as shown in Figure 2-7.
NOTE: To gain access to the CPU board see “Case Removal and Installation” on page 28.
Figure 2-7. CPU Configuration Switch Locations