Condec UPS3210 - Manual (Page 65)

Specifications 59
8.0 Specifications
Pressure Specifications:
Pressure range: Three independent pressure ranges
per instrument. See “Model Number
System” on page 50 for available
ranges.
Available pressure
calibrations:
Gage only, absolute only, or
gage and absolute
Overall accuracy: < ±0.05% Full Scale Max. Accuracy
statement includes all effects of
linearity, hysteresis, repeatability and
ambient temperature
Operating Temperature: +40° to +122°F (+4.4° to +50.0° C)
Storage Temperature:
0° to +185° F (–17.8° to +85°C)
Pressure Media:
UPS 3000, UPS 3210: Any liquid or gas compatible with
17-4 PH stainless steel.
UPS 3110: Any gas compatible with 17-4PH
stainless steel.
UPS3110 Pressure Limit Control Gage:
Size: 2-in. diameter
Range: Based on Model
Over-pressure Rupture Disk:
Rating: 3000 psig, nominal
Type: Stainless steel outer case
UPS3110 Pressure Media Filter:
Rating: 20 microns, Test Port
Type: Field replaceable
ORION-2C Control Valve:
Pressure Range: 3000 PSI max and vacuum
Type:
Micro-metering with replaceable soft
seat
Material: Aluminum body, clear anodized
Aluminum knobs, black anodized.
All other parts 300 series stainless
steel.
O-ring Material: Buna-N (standard)
ORION-3A Control Valve:
Pressure Range: 0-10000 PSI max and vacuum
Type:
Micro-metering with replaceable soft
seat
Material: 300 Series Stainless Steel body.
Aluminum knobs, black anodized.
All other parts 300 series stainless
steel.
O-ring Material: Fluorocarbon "Viton" (standard)
Relief Valve:
Type: Adjustable, atmospheric bleed
Setting: Adjustable to 10% above highest
calibrated pressure.
Material: 300 series Stainless Steel.
UPS3110 Internal Piping:
Tubing: Based on Model,
seamless Cu. or St Stl.
UPS3110 Couplings: Based on Model, Brass or Stainless
Steel, Swagelok type
UPS3110 Input Port:
Style:
1/4" 37° AN male
Pressure Rating: Based on Model
Material: Brass or Stainless Steel.
UPS3110 Test Port:
Pressure Rating: Based on Model.
Material: Stainless Steel.
UPS3110 Vent Port:
Style: 1/4" 37° AN male
Pressure Rating: Based on Model
Material: Brass or Stainless Steel.
UPS3110 Pressure Hoses:
Quantity Supplied: one output.
Length: 5 ft. nominal.
Style: Output hose - Nylon-lined core tube
with synthetic braid, polyurethane
cover. Fitted with quick-disconnect
plug (St Stl) on one end and 1/4"
37° female AN swivel tube coupling
on the other.
UPS3110 Pressure Limit Control Regulator:
Type: Single stage, self-venting,
non-bleed
Pressure Rating: 3000 psig max. inlet
Internal Pressure Sensor:
Type: Bonded, metal foil strain gage,
sputtered thin-film or equivalent.
Sensitivity: 3 mV/V nominal.
Construction: Completely weld-sealed Stainless
Steel outer body and pressure
cavity.
Over-pressure Capability: 750% F.S. on low-range
300% F.S. on mid-range
150% F.S. on high-range
Battery:
Type: Rechargeable, lead-acid gel.
Nominal voltage: 12 V.
Approx. Weight: 2.86 lbs.
Case: Polystyrene/H.I. ABS
Numerical Pressure Display:
Display Type: High Intensity, red LED digits, .043"
high.
Active Digits: 5 full digits, standard.
Polarity Indication: “-” sign