Seed Hawk GRANULAR AND LIQUID TANKS 2009 - Manual (Page 17)

Seed Hawk Manual Granular and Liquid Tanks Page 15
2.9.2 Safety Sign Information
Safety Sign Legibility
All safety signs applied to the implement must be visible and legible. Keep dust
and dirt cleared from safety signs and ensure that visibility is not obscured.
Safety Sign Replacement
Replacement safety signs may be ordered through your dealer or distributor.
Contact Seed Hawk, Inc if you are unable to obtain replacement safety signs
from a dealer or distributor.
Damaged or Deteriorated Safety Signs
Remove and replace any safety signs that have either damaged or show signs of
deterioration.
Safety Signs on Replacement Parts
Ensure that parts or components that are replaced on the implement that had a
safety sign attached originally include a safety sign.
Affixing Safety Signs to Implement
1. Ensure proper position and orientation before installing
2. Ensure installation area is clean and dry
3. Ensure ambient temperature is above 10˚ C (50˚ F)
4. Remove backing material to expose label adhesive
5. Place one edge of label to machine surface
6. Slowly press the label onto the surface
7. Ensure no air pockets exist under surface of label