Seed Hawk GRANULAR AND LIQUID TANKS 2009 - Manual (Page 46)

Seed Hawk Manual Granular and Liquid Tanks Page 44
8.6.1 Learn New System
The Learn New System mode
is a onetime process that
identifies each sensor to the
monitor. Before entering the
Learn New System Mode, be
sure that no sensors are
connected to the implement
harness, i.e. Ground Speed
Sensor, Fan Sensors, Meter
Sensors, Bin Sensors.
Procedure:
1. Press the Power Button to
turn the monitor on.
2. Press the DOWN arrow to
highlight Learn New System
and Default Settings
3. Press SELECT
4. A warning message now
appears asking Are you Sure?
Press SELECT to proceed or
press CANCEL to exit.