Seed Hawk GRANULAR AND LIQUID TANKS 2009 - Manual (Page 38)

6.0 MAINTENANCE
Seed Hawk Manual Granular and Liquid Tanks Page 36
6.1 MAINTENANCE SCHEDULE
Procedure Frequency
check lube clean change hours Item
9 6 ‘ S 5
Reference Notes
Wheel Hubs
main frame
6 100
100 hr or annually
re-pack bearings or 2 pumps grease
Metering System
sprockets and chains
6 25
25 hr or every 2 days
use dry graphite lubricant
Metering Components
Seed Hawk
®
‘ 100
100 hr, or, before seeding, or,
between product changes
Fan System
intake
9 ‘ 10
10 hr or daily
remove accumulated debris
Fan System
fan blades
9 ‘ 10
10 hr or daily
must be intact and clean
Fill Auger System
10 in
‘ 100
when changing between products,
or,
when stored for long periods of time
Fill Auger System
pillow block bearings
6 10/100
10 hr or daily, and,
100 hr or annually
Fill Auger System
universal joints
6 10/100
10 hr or daily, and,
100 hr or annually
Tank Return Line
open - drain in pail
9 100
at end of seeding season, or,
when stored for long periods of time
Tires
air pressure
9 10
10 hr or daily
inflate to proper pressure
NOTE: The HEX BORE bearings on each Stainless Steel meter are sealed.
DO NOT GREASE THESE BEARINGS.