Seed Hawk GRANULAR AND LIQUID TANKS 2009 - Manual (Page 52)

Seed Hawk Manual Granular and Liquid Tanks Page 50
2. Highlight Continue Calibrations
and Press SELECT.
3. The display will now say Start
Driving. With the drill in the down
position, drive the 400-foot
course. As you drive the “pulses
received” will begin counting up.
4. When you are at the end of the
400-foot course, you can press
Select to Exit and Save.
Note: In the illustration below, the
96 under Wheel Pulses Received
is for illustration purposes only.
You have now completed the Ground Speed Calibration.