Seed Hawk GRANULAR AND LIQUID TANKS 2009 - Manual (Page 41)

Seed Hawk Manual Granular and Liquid Tanks Page 39
8.3 CHANGING DISPLAYED FUNCTIONS
The display of the monitor can be changed to show any of the available functions
the operator chooses. Pressing either the UP arrow or the DOWN arrow button
while at the normal operate screen, will allow you pick from a list of the available
functions. Pressing the
UP arrow will change the Top Display, pressing the DOWN arrow will change the
Bottom Display.
OR
Note:
The sample procedure on the next page is based on the UP arrow being pressed
to set the “Top Display”. For the “Bottom Display, the procedure is the same. Use
the down arrow.
8.4 CHANGING DISPLAY SIZE
Depending on the preference of the operator, the Bottom display of the monitor
can be enlarged to make viewing easier. To change the display size press the
bottom button labeled
ENLARGE. Notice the button label now reads SMALLER. To return to the smaller
screen press the bottom button labeled SMALLER.