Triton FT5000 User Manual - Manual (Page 189)

C-7
A
PPENDIX
C - A
DS
G
RAPHICS
E
DIT
A
CCESS
I
NSTRUCTIONS
:
1. From the MAIN MENU screen,
select the TERMINAL CON-
FIGURATION option by press-
ing the number (6) on the key-
pad.
2. To View the options available
at the ADS GRAPHICS menu,
press the number (7) on the
keypad.
3. To EDIT the properties of an
ad file, press the number (3) on
the keypad.
D
ESCRIPTION
:
With the Ads/Graphics main dialog displayed, use the arrow keys to highlight
an ad entry in the list. Press the number (3) on the keypad to bring up the Ad
Properties dialog which you will use to E
DIT
the ad.
The Ad Properties dialog allows you to view and/or configure the following Ad
graphic display properties:
Filename. This option is disabled. The name of the graphic file that was selected
in the Ads/Graphics dialog is displayed.
Duration. This is the length of time (in seconds) the indicated Ad graphic will be
displayed on the terminal screen. To set the time, press the number (2) on the
keypad to bring up a data entry dialog. Enter the duration in seconds.
* Note *
The value must be between ‘0’ and ‘99999’ seconds. If the
Ad file is a motion graphic or video and ‘0’ is selected, the Ad
will be displayed for the actual playing time of the file.