Triton FT5000 User Manual - Manual (Page 198)

C-16
M
ODEL
FT5000 U
SER
M
ANUAL
5. In the Look In option should
be the “USB” location. If it’s
not present, <Cancel> out of
the SOFTWARE UPDATE
screen and then re-enter the
same screen.
6. When the Look In option has
“USB” present, the Filename
screen should have the termi-
nal software, size, and date/
time attributes for each file
loaded in the Flash drive.
9. The terminal will restart at this
time and the installation of the
software will be performed au-
tomatically. After the terminal
completes it’s reboot se-
quence, remove the Flash drive
device.
NOTE: An additional restart is rec-
ommended after the file is loaded.
8. A screen will appear verifying
the selected file and prompt to
restart the terminal. Press <En-
ter> to continue.
7. Use the left and right <Arrow>
keys on the keypads to high-
light the selected file. Press
<Enter> when selected.