Ft5000 u – Triton FT5000 User Manual User Manual
Page 94
7 4
M
ODEL
FT5000 U
SER
M
ANUAL
F
ACTORY
D
EFAULT
: N/A
A
CCESS
I
NSTRUCTIONS
:
1.
From the MAIN MENU screen,
select the DIAGNOSTICS option
by pressing number (2) on the
keypad.
2.
Enter the DISPENSER diagnos-
tics menu by pressing number
(4) on the keypad.
3.
To modify the CASSETTE PA-
RAMETERS, press number (8)
on the keypad.
4.
To force the dispening mecha-
nism to RELEARN BILL THICK-
NESS, press number (1) on the
keypad.
R
ELEARN
B
ILL
T
HICKNESS
D
ESCRIPTION
:
The first time the dispenser is set up or if a new note cassette is installed, the
mechanism will automatically enter a “learning” mode, which will learn the thickness
of the currency or other media. During this process, the unit will dispense and reject
as many as 7-15 notes. For multiple cassettes, the number of test rejects could almost
fill the single-note compartment of the reject vault. In such cases, it is recommended
that you remove any rejected notes from the unit before placing the ATM back in
service.
In some instances (excessive number of rejects during normal operation, for ex-
ample), it may be necessary to manually initiate this process. The R
ELEARN
B
ILL
T
HICKNESS
function enables you to force the dispenser to enter the learning mode.
Note that the operation affects ALL active cassettes in the dispenser!
Press the number (1) on the keypad to initiate the relearn operation. A series of
message dialogs will appear to report the status of the operation.