ArtDio IPE 1000 - Manual (Page 34)

34
confirmation tone.
System must now be restarted
Step 10: Enter code "98" then press "1" and "#" as the ending prompt. You will then hear
the confirmation tone andthe system will restart automatically.
Step 11: Enter code "09" to begin configuring for prefix for this gateway.
Step 12: Enter the prefix as "33" and "#" as the ending prompt. You will then hear the confirmation
tone.
Step 13: Enter code "14" to begin configuring the Internal Call Access code for this gateway.
Step 14: Enter the Internal Call Access Code as "*" and "#" as the ending prompt. You will then
hear the confirmation tone.
Step 15: Enter code "28" to begin configuring the Extension Number Length of the PBX for this
gateway.
Step 16: Enter the Extension Number Length of the PBX as "3" and "#" as the ending prompt. You
will then hear the confirmation tone.
System must now be restarted
Step 17: Enter code "98" then press "1" and "#" as the ending prompt. You will then hear
the confirmation tone andthe system will restart automatically.
Place the handset on the phone phone to end your configuration session.