ArtDio IPE 1000 - Manual (Page 50)

50
Delete
Entries The Access Codes that you are going
to remove from the Code List WO [0~9],
example
"012", "002"
Note 4 The Inbound International Access Code is used to analyze the number that the gateway is
receiving from analog voice interfaces. The received numbers are carried with this specified
Inbound International Access Code, and the call will be routed to the remote gateway through
the FXO interface to its PSTN. The user will then only need to pay domestic phone fees
instead of international phone fees. Or, an international call will be sent directly through the
local FXO interface as an international call from a local PSTN and will not be able to benefit
from the Toll-bypass advantage. If your gateway is not permitted to make international calls
through the remote gateway, leave the In-bound International Access Code entry blank.
4.2.10 International Code Information- Console Interface
Category Entry Console Mode Console Command Data
Type
International
Access
Code
(Outbound) Dial Code Code dial_code
international
<1-999>
RW
Code List Code show ac_summary RO
Add
Entries Code intn_code add <1-999> RW
International
Access
Code
(Inbound)
Delete
Entries Code intn_code del <1-999> RW
Note 5 The Access Code here is the same as the code that you would be dialing locally to make an
international call.