ArtDio IPE 1000 - Manual (Page 35)

35
4. Basic Configuration
4.1 System Console Modes
EXEC Privileged Configuration
Console Channel
exit exit
line console
channel
end
end
exit/end
configure
Routing
Routing
exit/end
Code
code exit
end
disable
enable
login
exit
4.2 System Management
The following general information is needed to configure the system with the appropriate routing information
to route calls between PBXs and voice gateways. You must configure the prefix and group ID that will be
used inside the group of PBX VoIP gateways. The master gateway IP address is essential for a PBX VoIP
gateway to synchronize the routing information.