Avigilon ACC Standard Version 5.2.2 - Manual (Page 28)

Disconnecting a Camera from a Server
1. In the Setup tab, select a Site then click .
2. In the Connect/Disconnect Cameras... tab, select the camera you want to disconnect from the Connected
Cameras list, then do one of the following:
l
Click Disconnect. The camera will be disconnected from the server and moved to the Discovered
Cameras list.
l
Drag the camera into the Discovered Cameras list.
Upgrading Camera Firmware
Camera firmware updates are typically included with the Avigilon™ Control Center Server update packages.
Camera firmware updates are automatically downloaded and installed to the camera.
When the camera firmware is being upgraded, video from that camera cannot be displayed and the System
Explorer will display beside the camera name.
When the firmware upgrade is complete, the System Explorer will display again and video from the camera
will display.
Users and Groups
When users are added to the AvigilonControl Center, they are assigned to a group that defines their access
permissions in a Site. Use the Users and Groups dialog box to create and manage users and groups.
Adding a User
1. In the Setup tab, select the Site you want to add users to, then click .
2. In the Users tab, click .
28 Disconnecting a Camera from a Server