Avigilon ACC Standard Version 5.2.2 - Manual (Page 30)

Figure 17: Add User dialog box, General tab
4. If you don’t want this user to be active yet, select the Disable user check box. Disabled users are in the
system but cannot access the Site.
5. In the Login Timeout area, select the Enable login timeout check box to limit the amount of time the user
can be logged in while the Client is idle.
6. In the Password area, complete the following fields:
l
Password: enter a password for the user.
l
Confirm Password: re-enter the password.
l
Require password change on next login: select this check box if the user must replace the
password after the first login.
30 Adding a User