Avigilon ACC Standard Version 5.2.2 - Manual (Page 66)

Button Description
Infinity.
6. Click Apply to Cameras... to apply the same settings to other cameras of the same model.
7. Click OK.
Dewarping an Immervision Panomorph Lens
If your camera uses an Immervision Panomorph lens, you may choose to dewarp the image through the Avigilon
Control Center software.
1. In the Setup tab, choose an Immervision Panomorph lens camera and click .
2. In the Image and Display dialog box, select the Lens Type: used by the camera.
If the Lens Type list is empty, contact Avigilon Technical Support and request that support for your
camera and lens model be added to the application.
Figure 49: Image and Display dialog box for fisheye lens configuration
3. In the View Perspective: drop-down list, select one of the following options:
l
Floor: select this option if the camera is installed to look up.
l
Ceiling: select this option if the camera is installed to look down.
66 Dewarping an Immervision Panomorph Lens