Avigilon ACC Standard Version 5.2.2 - Manual (Page 50)

l
To change the data aging settings for all linked cameras, move the slider for one linked camera
and all linked cameras will be updated.
l
To change the data aging setting for one camera, break the camera's link to other cameras by
clicking the
icon to the left of its name, then make your changes.
3. In the Max. Record Time, manually enter a maximum record time or select one of the options from the
drop-down list for each camera.
NOTE: If the time estimated in the Total Record Time column is shorter than what is set in the Max. Record
Time column, the camera's actual recording time will be shorter than the Max. Record Time .
4. Click OK.
POS Transactions
The Point of Sale (POS) Transaction Engine is a licensed feature that records raw data from POS transaction
sources. You can link cameras to specific POS transaction sources, and set up the system to make note of
transaction exceptions.
Once POS transactions have been set up, you can see live and recorded POS transaction data in the View tab
while watching any linked video.
To monitor live POS transactions, see Monitoring Live POS Transactions .
To review recorded POS transactions, see Reviewing Recorded POS Transactions .
Adding a POS Transaction Source
1. In the Setup tab, select the server you want to add a POS transaction source to and click .
2. In the POS Transactions dialog box, click .
3. Enter the Hostname/IP Address: and the Port: number for the POS transaction source device, then click
.
50 POS Transactions