Avigilon ACC Standard Version 5.2.2 - Manual (Page 75)

Camera(s): area are used to record the events triggered by this digital input.
8. Click OK.
Setting Up Digital Outputs
Once a digital output is configured, you can manually trigger the digital output in an image panel. See Triggering
Digital Outputs for more information.
NOTE: The dialog box may appear differently depending on the camera. Options that are not supported by the
camera will be disabled or hidden.
1. In the Setup tab, select a camera and click .
2. In the Digital Outputs: area, select an output.
Figure 57: Digital Inputs and Outputs box: Digital Output Settings
3. Enter a Name: for the digital output.
4. Select the digital output's default Circuit State:.
Setting Up Digital Outputs 75