Avigilon ACC Standard Version 5.2.2 - Manual (Page 69)

Figure 51: Image Dimensions dialog box
3. Click OK.
Motion Detection
In the Motion Detection dialog box you can define specific motion detection areas and configure the camera's
sensitivity and threshold for motion.
Selecting a Motion Detection Area
In the Motion Detection dialog box, you can set the green motion detection areas in the camera's field of view.
Motion detection is ignored in the areas not highlighted in green.
1. In the Setup tab, select the camera you want to edit and click .
2. In the Motion Detection dialog box, use the tools above the image panel to define the green motion
detection area:
l
: Click this button then draw green rectangles to define the motion detection areas. You
can draw multiple rectangles to create your motion detection area.
Motion Detection 69