Avigilon ACC Standard Version 5.2.2 - Manual (Page 40)

Adding a Rule
NOTE: Users with a Standard license can have up to 3 rules in their system.
1. In the Setup tab, select the Site you want to add a rule to, then click .
2. In the Rules dialog box, click .
3. Select the events that will trigger the rule. If blue underlined text appears in the rule description, click on
the text to further define the event.
When the trigger event is defined, click .
Figure 27: Select Rule Event(s) page
4. Select the actions that will occur when the rule is triggered. If any blue underlined text appears in the rule
description, click on the text to further define the action.
When the action is defined, click .
40 Adding a Rule