Avigilon ACC Standard Version 5.2.2 - Manual (Page 78)

To use this feature, speakers must be connected to the camera and a microphone must be connected to your
local Client.
NOTE: The dialog box may appear differently depending on the camera. Options that are not supported by the
camera will be disabled or hidden.
1. In the Setup tab, select the camera you want to edit and click .
Figure 59: Speaker dialog box
2. Select the Enable check box to enable audio broadcasting. Speakers connected to the camera will
broadcast audio from the microphone that is connected to the local Client.
3. Select the Record speaker output check box to record what is broadcast.
4. Enter a name for the speaker.
5. The Volume: slider controls the volume of the speakers.
6. In the Link to Camera(s): area, select cameras to link to the speakers.
7. To test the Microphone Level:, speak into the microphone. The red bar will move to show the audio input
level.
8. Click OK.
78 Speaker