Avigilon ACC Standard Version 5.2.2 - Manual (Page 97)

1. In the toolbar, click . PTZ controls are now enabled in image panels that are displaying PTZ video.
2. In the image panel, click .
The PTZ Controls are displayed in a floating pane immediately beside the image panel.
NOTE: The controls may appear differently depending on the camera. Some options are disabled or
hidden if they are not supported by the camera.
Figure 69: PTZ Controls
3. To pan or tilt, do one of the following:
l
In the image panel, drag your mouse from the center to move the camera in that direction. The
farther the cursor is from the center of the image panel, the faster the camera will move.
l
If the camera supports Click to Center, click anywhere on the image panel to center the camera to
that point.
Figure 70: PTZ On-screen controls
Controlling PTZ Cameras 97