In-Situ TROLL Link Telemetry System Operators Manual - Manual (Page 17)

800-446-7488 17 www.in-situ.com
-OR-
3. Enter appropriate values for each time parameter under the Create a Schedule
section.
• Start Time denotes the time each day that Message/Wake periods begin
(e.g., 6:00 AM).
• End Time denotes the time each day that Message/Wake periods stop
(e.g., 9:00 AM).
• Wake Interval denotes how often Message/Wake periods occur
(e.g., a 1-hour interval means periods occur at 6:00 AM, 7:00 AM, 8:00AM, 9:00AM).
• Wake Duration denotes how long Message/Wake periods last
(e.g., a 30-minute duration means periods occur from 6:00 AM - 6:30 AM,
7:00 AM - 7:30 AM, 8:00 AM - 8:30 AM, 9:00 AM - 9:30 AM)
4. Click the Create button. All Message/Wake periods that satisfy the parameter
values populate the Message/Wake Schedule field.
5. Use the Select All button to select all available Message/Wake periods. Use the
Clear All button to remove all selected periods.
Select Message/Wake periods based on when you are typically
available to receive messages or have the ability to dial-
up/connect to the TROLL Link Telemetry System.
Configuring the SMS (Text) Message Format
Configure the number of SMS messages sent, SMS message contents, and the SMS
message destination (phone or email) from the Messages tab.
Skip this section when connecting to the TROLL Link Telemetry System using
dial-up or TCP/IP connections.