In-Situ TROLL Link Telemetry System Operators Manual User Manual
Page 27
800-446-7488
27
www.in-situ.com
3. Enter your User ID and Password supplied by In-Situ. Click Login.
4. The Site Index appears. The Site Index displays the site name, most recent
message received date, number of devices at the site, and the alarm status.
5. Click a site name to view more data from that site.
6. Select a Device to view more data from that device.
If the next transmission interval has not occurred, you should confirm that
communication from all devices in the network has been successful.
1. Ensure all components of the TROLL Link Telemetry System have power applied.
2. From the Site Index, click the site name.
3. Click the first device listed.
4. Select Manage Device under the Site Management heading in the left navigation
bar.
5. Select View Config Messages under the Device Config heading in the left
navigation bar.
If data does not refresh at the expected rate or the site does not display the network,
contact technical support.
TROLL Link 101 and 201 Wiring Diagram
Number
Function
Wire
1
DC Com (-)
Pulse (-)
Bulkhead black wire;
solar panel black wire
2
RS485 (-)
Bulkhead green wire
3
Pulse (+)
4
RS485 (+)
Bulkhead blue wire
5
DC (+)
8-24 VDC
Bulkhead red wire;
fuse blue wire
Contact In-Situ to configure your counter (pulse) input.