In-Situ TROLL Link Telemetry System Operators Manual - Manual (Page 26)

800-446-7488 26 www.in-situ.com
TROLL Link 101 and 201 Setup
The TROLL Link 101 and 201 systems connect to the In-Situ Data Center, and arrive
pre-configured to your settings. Access the Data Center to view your site.
To change settings or learn more about the Data Center, see the In-Situ Data Center
section.
Connecting the Antenna - TROLL Link 101 Only
1. Screw the antenna and gasket onto the antenna connector, located on the top of the
enclosure mounting bracket.
Installing a Battery
1. Install batteries with the terminals oriented toward the top of the enclosure.
2. Plug the black (negative) leads into the black terminals of the batteries first. Ensure
that the terminal does not sit between the lead clip and the plastic sheath, but that
the lead clip encompasses the battery terminal.
3. Plug the red (positive) leads into the red battery terminals. Ensure that the terminal
does not sit between the lead clip and the plastic sheath, but that the lead clip
encompasses the battery terminal.
Accessing the Data Center
Note that it may take up to an hour for data to be transmitted to the Data Center,
depending on the data service package you have.
1. Open a Web browser.
2. Enter the URL:
http://www.isi-data.com