Pyromation Series 610 1_16 DIN - Manual (Page 33)

1 /
4
-DIN, 1 /
8
-DIN & 1 /
16
- DIN Controllers & Indicators - Product Manual
Option Slot 1 - SSR Driver Output Module
If option slot 1 is fitted with an SSR driver output module, make connections as illustrated.
The solid-state relay driver is a 0-10V DC signal, load impedance must be no less than 500
ohms. SSR driver outputs are not isolated from the signal input or other SSR driver outputs.
1
2
∼
20
21
∼
1 /
16
DIN 1 /
4
DIN & 1 /
8
DIN
Figure 19. Option Slot 1 - SSR Driver Module
Option Slot 1 - Triac Output Module
If option slot 1 is fitted with a Triac output module, make connections as shown. This output
is rated at 0.01 to 1 amp @ 280V AC 50/60Hz. (140V max for direct Valve Motor control).
19
1 _
+
20
21 +
2
3 _
1 /
16
DIN 1 /
4
DIN & 1 /
8
DIN
Figure 20. Option Slot 1 - Triac Module
Option Slot 1 - Linear Voltage or mADC Output module
If option slot 1 is fitted with a DC linear output module, make connections as illustrated.
19
20
_
21
+
1
2
+
3 _
1 /
16
DIN 1 /
4
DIN & 1 /
8
DIN
Figure 21. Option Slot 1 - Linear Voltage & mADC Module
Page 28
Connections 59305, Issue 6 – March 2006