SHIMPO DEG-2000 User Manual
Page 28
26
7.3.8 Ranking output (OK rank 16 or less) –– Output signal arrangement
The ranking output signal is output when “ITEM 1”, “ITEM 2” or “ITEM 3” is selected with
[JUDG OUT], or an item bit is entered in the set mode (6).
Note:
“Item” refers to “ITEM” of DEG2000. The following table shows the output
signal arrangement of the DC input/output connector (refer to ◯
15
on page
7).
Pin No.
Signal name
Description
11
READY
Turns on in measure mode during normal operation.
12
Error
Turns on when two signals are simultaneously input and
turns off when all signals are turned off.
13
Master OK
Turns on when mastering result is OK.
14
Check input signal
Turns on when input signal is received and processing is
completed, and turns off when input signal is turned off.
15
All OK
Turns on at input of measure command when all items
are OK.
16
All NG
Turns on at input of measure command when any one
item is NG.
17
Item -NG
18
+NG
19
OK1
20
OK2
21
OK3
22
OK4
23
OK5
24
OK6
25
OK7
26
OK8
27
OK9
28
OK10
29
OK11
30
OK12
31
OK13
32
OK14
33
OK15
34
OK16
35
-COM
36
-COM
Output common line: 0 V