Techne TC-3000X - Manual (Page 31)

Edit a selected field or step
DONNA
Heated Lid 105°C
Preheat Lid on
[ , to edit ]
29
To edit a field or step in an existing program
When the unit is switched on the display will
show this screen.
If known, type in the 'Speed dial' number for
the required program and press "Enter"
This will take you directly to the required
program.
If you do not know the 'Speed dial' number,
press "Enter" to access the list of stored
programs.
Either:
1. Scroll to the required program using the
"Up Arrow" or "Down Arrow" keys
or
2. Type the first letter of the program name in
the 'New program' field; this will then list all
the program names beginning with that
letter. Use the "Up Arrow" or "Down
Arrow" keys to select the required
program.
Press "Enter" to accept
The full set of options for a program is shown
here; these are shown on the LCD screen three
lines at a time.
Use the "Down Arrow" and/or the "Up Arrow"
keys to select the option you require.
Press the "Enter" key to select the option.
Select 'Edit program' and a screen similar to
this will appear.
Use the "Down arrow" and/or the "Up arrow"
keys to select the field or step you want
to edit.
You can now edit the active field or step by
first pressing the "Enter" key
Programs [0]
Information
Configuration
[ , to select ]
DAVID 8 [D]
DONNA 7
[ , to select ]
DONNA [7]
Run program
View program
Edit program
Copy program
Delete program
Set password
[ , to select ]
[ to save ]