Techne TC-3000X - Manual (Page 40)

At any time during programming the TC-3000 or TC-3000X, when you are satisfied with the program,
you can finish and accept what you have done by first pressing the "End" key.
Then follow the instructions on screen. If you are not sure, wait for the instructions in the prompt line to
scroll back to the first line that you see.
To save the program
Stopping what you are doing
38
A program can only be run once it has been
saved. Press the "End" key.
The prompt line will flash between 'SAVE?'
and 'YES or NO'.
Press "Enter" for 'Yes' to save the changes
you have made.
If you press "End" for 'No' then all the
changes you have made will be lost.
The program is now ready to run and will be
allocated with a unique "Speed dial" number
which can be used to rapidly locate the
program from the main start-up screen.
Use the "Up Arrow" and "Down Arrow"
keys to scroll through the list of options.
-------- Stage 1 --------
Number cycles 10
Step 94.0° C 00m30 max
[ SAVE? ]
GEORGE (10)
Run Program
View Program
[ , to select ]
[ Yes or No ]