Techne TC-3000X - Manual (Page 35)

[ , to edit ]
[ to delete step ]
[ , to edit ]
To insert additional steps
A new stage will be inserted which consists of
a 'Number cycles' field and one step.
Edit the number of cycles by typing the
number required then press "Enter"
Use the "Down Arrow" key to move to the
step.
Press "Enter" to edit the step as described
above.
Press "Enter" again to accept.
To insert a new step before the first step, use
the "Up Arrow" or "Down Arrow"
keys to select 'Number cycles'.
Press the "Decimal Point" key to insert a new
step.
To insert a new step after an existing step, use
the "Up Arrow" or "Down Arrow"
keys to select the step.
Press the "Decimal Point" key to insert a new
step.
Use the "Up Arrow" or "Down Arrow"
keys to select the step you wish to delete.
Press "Delete" to delete the step.
The prompt line will flash between 'DEL STEP?'
and 'YES or NO'.
Press "Enter" to delete the step.
or
Press "End" to return to editing the step.
33
-------- Stage 1 --------
Number cycles
Step 94.0° C 00m30 max
[ edit no.cycles ]
-------- Stage 1 --------
Number cycles 10
Step 94.0° C 00m30 max
[ '.' to insert step ]
-------- Stage 1 --------
Number cycles 10
Step 94.0° C 00m30 max
[ '.' to insert step ]
-------- Stage 1 --------
Number cycles 10
Step 94.0° C 00m30 max
[ DEL STEP ? ]
To delete a step
-------- Stage 1 --------
Number cycles 10
Step 94.0° C 00m30 max
[ '.' to insert step ]
[ , to edit ]
[ to delete step ]
[ Yes or No ]