Brother MFC-9420CN - Manual (Page 104)

Important information
A - 4
A
FDA regulations
U.S. Food and Drug Administration (FDA) has
implemented regulations for laser products
manufactured on and after August 2, 1976.
Compliance is mandatory for products marketed in
the United States. The following label on the back
of the machine indicates compliance with the FDA
regulations and must be attached to laser products
marketed in the United States.
Important safety instructions
1
Read all of these instructions.
2
Save them for later reference.
3
Follow all warnings and instructions marked
on the product.
4
Unplug this product from the wall outlet
before cleaning inside of the machine. Do
not use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
5
Do not place this product on an unstable
cart, stand, or table. The product may fall,
causing serious damage to the product.
6
Slots and openings in the cabinet and the
back or bottom are provided for ventilation;
to ensure reliable operation of the product
and to protect it from overheating, these
openings must not be blocked or covered.
The openings should never be blocked by
placing the product on a bed, sofa, rug, or
other similar surface. This product should
never be placed near or over a radiator or
heater. This product should never be placed
in a built-in installation unless proper
ventilation is provided.
7
This product should be connected to an AC
power source within the range indicated on
the rating label. Do NOT connect it to a DC
power source. If you are not sure, contact a
qualified electrician.
8
This product is equipped with a 3-wire
grounded plug. This plug will only fit into a
grounded power outlet. This is a safety
feature. If you are unable to insert the plug
into the outlet, call your electrician to replace
your obsolete outlet. Do not defeat the
purpose of the grounded plug.
9
Use only the power cord supplied with this
machine.
MANUFACTURED:
Brother Industries, Ltd.,
15-1 Naeshiro-cho Mizuho-ku Nagoya,
467-8561 Japan
This product complies with FDA radiation
performance standards, 21 CFR subchapter J.
WARNING
Use of controls, adjustments or performance of
procedures other than those specified in this
manual may result in hazardous invisible
radiation exposure.
Internal laser radiation
Max. Radiation Power 5 mW
Wave Length 780 - 800 nm
Laser Class Class 3B