Brother MFC-9420CN - Manual (Page 92)

Making copies
11 - 3
11
Copy options
When you want to quickly change the copy
settings temporarily for the next copy, use the
Copy Options keys. You can use different
combinations.
Note
■
These settings are temporary, and the
machine returns to its default settings 60
seconds after copying, unless you have
set the Mode Timer to 30 seconds or less.
(See Mode Timer on page 3-8.)
■
You can save some of the copy settings
you use most often by setting them as
default.
Increasing copy quality
You can select the copy quality. The default
setting is Auto.
1
Press (Copy) to illuminate it in
blue.
2
Load your document.
3
Use the dial pad to enter the number of
copies you want (up to 99).
4
Press Options and
▲ or ▼ to select
Quality .
Press Menu/Set.
5
Press
▲ or ▼ to select the copy quality
you want (Auto, Text or Photo).
Press Menu/Set.
6
Press Black Start or Color Start.
To change the default setting follow the
instructions below:
1
Press Menu/Set, 3, 1.
2
Press ▲ or ▼ to select Auto, Text or
Photo .
Press Menu/Set.
3
Press Stop/Exit.
Auto Suitable for documents that
contain both text and
photographs.
Text Suitable for documents
containing only text.
Photo Suitable for copying
photographs.
Copy Options keys
Copy
1.Quality