Avery ALS 330/430 - Manual (Page 27)

Operators Manual
ALS 330/430
Release 4/06 Page 25 Operation
4.2.1 Removing label material
Before you mount a new roll of labels, it is necessary to remove the accumulated roll of backing
material. Turn the lever the expanding pads retract. The roll of backing material can easily be
pulled off the rewind mandrel.
Figure 8 Remove label material
To ensure a reliable function of the unwind it is important to exchange the collected backing
material each time you mount a new label roll.
4.2.2 Mounting a new label roll
Mounting of the new label roll depends on the used machine