Canon Color imageCLASS MF8580Cdw - Manual (Page 105)

105
Tro
ub
le
sh
oo
tin
g
Resolve a Displayed Message
This section describes some of messages related to the toner, memory, and paper. (Where “XXXX” appears in the descriptions
below, the toner cartridge colors black, yellow, magenta, or cyan appear in the actual messages.)
For more details about other messages, see [Troubleshooting]  [When
an Error Message Appears] in the e-Manual.
Message Action
<Prepare the XXXX
toner cartridge.>
• The toner cartridge needs to be replaced soon. Prepare the replacement toner cartridge
(
→ p.87).
If this message is displayed while receiving a fax, the incoming fax will be stored in the
memory without being printed.
Reports may not be printed, even if they are set to be printed automatically.
If <Continue Printing When Toner Is Low> in <RX Print Settings> is set to <On>,
however, printing will be continued, but faxes may fade or blur.
<End of Toner Cart.
Lifetime XXXX>
• It is recommended to replace the cartridge with a new one. ( → p.87). You can continue
printing, but the print quality cannot be guaranteed.
<The memory is full.>
• If there are any jobs waiting to be sent or printed, wait until the jobs are complete.
• Split the job into smaller subsets or reduce the scanning resolution and try to send them
again (
→ p.53).
<The memory is full.
Scanning will be
canceled. Do you want
to print?>
• Print pages successfully scanned or cancel the job.
<Paper Size & Settings
Mismatch>
• Change the <Paper Settings> to the size of the loaded paper ( → p.27).
• When printing with the printer driver, verify that the paper size setting on the computer is
correct.
<No paper> Load paper ( → p.20).