Canon Color imageCLASS MF8580Cdw - Manual (Page 64)

64
Receive a Fax from Memory
If a fax is stored in memory, you can view the sender of the received fax and print or forward
the fax.
Switching to Memory Lock Mode
1
Press [ ].
2
Press [ ▲ ] or [ ▼ ] to highlight <System Management Settings>, and then
press [OK].
3
Press [ ▲ ] or [ ▼ ] to highlight <Communication Management Settings>,
and then press [OK].
4
Press [ ▲ ] or [ ▼ ] to highlight <Memory Lock Settings>, and then press
[OK].
5
Press [ ▲ ] or [ ▼ ] to highlight <On>, and then press [OK].
6
Set the details as needed.
<Memory Lock
PIN>
Register a seven-digit PIN to protect the memory lock
settings.
You can use numbers between "0" and "9," but
cannot register consecutive digits that consist of
only "0" as a PIN.
<Report Print>
Set the RX Result Report to print automatically when faxes
are received into the memory.
• <Off>: Do not print the RX Result Report.
• <On>: Print the RX Result Report.
To use this feature, you must also activate the
<RX Result Report> item:
[
] (Report)  <Report Settings> 
<RX Result Report>
The default setting is <Off>.
<Memory Lock
Time>
Set this feature to receive faxes into the memory only for a
specified time. When the preset time starts, the machine is
switched to receive fax into the memory. When the preset
time ends, faxes stored in the memory are automatically
printed and the memory receiving feature is deactivated.
7
After you have specified the setting, press <Apply>.
8
Press [ ] to close the screen.