Canon Color imageCLASS MF8580Cdw - Manual (Page 31)

31
Co
py
5
Press [ ▲ ] or [ ▼ ] to highlight the document size, and then press [OK].
6
Press [ ].
When placing your
documents in the feeder
Copying starts automatically.
When placing your
documents on the
platen glass
1. Place the next page on the platen glass, and then
press [ ].
• Press [ ] for every scanning.
2. After scanning all your documents, press <Start Copying>.
Enlarge or Reduce Copies
Enlarge or reduce copies using custom copy ratios.
1
Place your documents ( → p.18).
2
Switch to the Copy mode ( → p.15).
3
Press [ ▲ ] or [ ▼ ] to highlight <Copy Ratio>, and then press [OK].
4
Press [ ▲ ] or [ ▼ ] to highlight the desired ratio, and then press [OK].
• If you want to set a copy ratio in 1% increments, select <Custom Ratio>, and then
enter the copy ratio using the numeric keys or press [
▲ ] or [ ▼ ] to specify the ratio.
5
Press [ ].
Adjust the Image Quality for Copy
You can adjust the levels of colors (yellow, magenta, cyan, or black). For
details, see [Copying]  [Various Copy Settings]  [Adjusting Color
Balance] in the e-Manual.
Adjusting the Density
You can make the density brighter or darker than the original documents.
1
Place your documents ( → p.18).
2
Switch to the Copy mode ( → p.15).