Change the default copy settings, Change the default copy settings …………………………………… 37, Co py – Canon Color imageCLASS MF8580Cdw User Manual
Page 37
37
Co
py
Change the Default Copy Settings
You can change the default copy settings that are applied when the machine is restarted,
[
] is pressed or the screen is returned to the default screen after auto reset is performed.
1
Press [
].
2
Press [
▲
] or [
▼
] to highlight <Copy Settings>, and then press [OK].
3
Press [
▲
] or [
▼
] to highlight <Change Default Settings>, and then press
[OK].
4
Press [
▲
] or [
▼
] to highlight the desired option, and then press [OK].
<Number of
Copies>
Select the copy quantity.
<Density>
Make the density lighter or darker.
<Original Type>
Select the image quality.
<2-Sided>*
Copy 1-sided document to 2 sides.
<Copy Ratio>
Select the copy ratio.
<Paper>
Specify the paper source.
<N on 1>
Copy multiple documents onto one sheet.
<Collate>
Collate copies of a complete copy job arranged in page
sequential order or by page.
<Erase Frame>
Specify the width of the frame to erase.
<Sharpness>
Emphasize the outline of the image or decrease the contrast.
<Color Balance>
Adjust the levels of yellow, magenta, cyan, or black.
* MF8580Cdw only
5
Specify the desired setting.
6
After you have specified the setting, press <Apply>.
7
Press [
] to close the screen.
You can register frequently used combinations of copy settings as
favorite settings (modes) on this machine. For details, see [Copying]
[Configuring Copy Settings to Your Needs] [Registering
Combinations of Frequently Used Copy Settings] in the e-Manual.