Avaya IP Office - Manual (Page 14)

Voicemail Pro Installation Page 14
EN-S Issue 01b (20 June 2011) IP Office
2. Windows Server Installation
This section covers the installation of the Voicemail Pro server onto a Windows server PC. Voicemail Pro 7.0 can be
installed with the following IP Office systems running IP Office Release 7.0 software:
· IP Office 500
· IP Office 500v2
2.1 General Installation Requirements
Here is a list of general requirements for all types of voicemail installation.
· A PC with IP Office Manager and Microsoft .NET Framework versions 2.0 installed on it. If .NET 2.0 is not detected,
you will be prompted to install it before the Voicemail Pro installation proceeds.
· Licenses based on the serial number of the IP Office systems Feature Key. These should include:
· A license for Voicemail Pro and any additional voicemail ports is required. If Voicemail Pro Server is installed
without a license it will run for 2 hours and then shut down.
· Licenses for any other Voicemail Pro components being installed, see Voicemail Pro Licenses .
· IP Office Applications DVD.
Tips
· Before you start to install Voicemail Pro it is advisable to check that the PC that you are using can connect to the IP
Office unit and that you can load and save a configuration file using IP Office Manager.
· Switch off any PC and hard disk sleep, power down, suspend, hibernation modes.
· The Voicemail Pro software needs to be installed using an account with full administrator rights on the PC. The
service subsequently runs under that account. We recommend that a specific account is created for this purpose
and set so that its password does not expire.
10