AIS Router AI2524 - Manual (Page 21)

Chapter 1: Introduction
August 1997 Page 1-7
2524UM
Labels Labels are used in diagrams to designat
physical components such as jumper straps,
switches, and cable connectors. For exam-
ple:
COM1
BOOT1
If the physical component being described is
part of the text, it appears as regular type:
To reset the COM1 port connector, press th
BOOT switch.
Menu | Submenu Menu selections are shown in bold text. The
bar separates the main menu from submenus.
For example:
File | Exit
indicates that you should select the File
menu, and then select the Exit menu item.
Screen output Screen shots, system prompts, and error
messages displayed on the screen are shown
in this style:
+CONFIG PORT,LPORT=40,HPORT=47,BITS=8
+CONFIG PORT,LPORT=48,HPORT=49,BITS=7
+CONFIG PORT,LPORT=50,BITS=8$0778
Warning: Warning messages indicate critical informa-
tion required for your safety or for correct
system operation. For example:
Warning: Failure to heed this important
text could cause damage or unre-
liable results.