AIS Router AI2524 - Manual (Page 56)

AI2524 Router Card User’s Manual
Page 4-20 August 1997
2524UM
Router# co?
configure connect copy
z Enter the configure command followed by a space and a ques-
tion mark (?) to list the command's keywords and a brief explana-
tion:
Router# configure ?
memory Configure from NV memory
network Configure from a TFTP network host
terminal Configure from the terminal
<cr>
The <cr> symbol by itself indicates there are no more keywords or ar-
guments. Press <Enter> to execute the command.
z Enter the terminal keyword to enter configuration mode from
the terminal:
Router# configure terminal
Enter configuration commands, one per line.End with CNTL/Z
Router(config)#
z Enter the access-list command followed by a space and
question mark (? ) to list the command's keywords:
Router(config)# access-list ?
<1-99> IP standard access list
<100-199> IP extended access list
<1000-1099> IPX SAP access list
<1100-1199> Extended 48-bit MAC address access list
<200-299> Protocol type-code access list
<300-399> DECnet access list
<400-499> XNS standard access list
<500-599> XNS extended access list
<600-699> Appletalk access list
<700-799> 48-bit MAC address access list
<800-899> IPX standard access list
<900-999> IPX extended access list
z Enter the access list number 99 . Then, enter another question
mark (?) to see the arguments and brief explanations for the key-
word: