AIS Router AI2524 User Manual
Page 72
Advertising
AI2524 Router Card User’s Manual
Page 5-6
August 1997
2524UM
Figure 5-1:Using SLARP to Acquire the New Router's IP
Address
z
In response to BOOTP or RARP requests, an IP address is sent
from the BOOTP or RARP server to newrouter.
A BOOTP or RARP server must have already been set up to map
newrouter's MAC address to its IP address. If the BOOTP server
does not reside on the directly attached network segment, routers
between newrouter and the BOOTP server can be configured with
the
ip helper-address
command to allow the request and
response to be forwarded between segments, as shown in
Advertising