AIS Router AI2524 User Manual
Page 406
AI2524 Router Card, Version 1.00 Release Notes
August 1997
Page 0
RN194
Copyright
© Copyright 1983-1997 Applied Innovation Incorporated (AII).
The material discussed in this manual is the proprietary property of
AII and AII retains all rights to reproduction and distribution of this
document.
AISwitch, AISwitch Series 180 and AISwitch Series 130 are regis-
tered trademarks of Applied Innovation Inc.
Any other trademarks appearing in this documentation are regis
tered trademarks of their respective companies.
FCC Warning
The Federal Communications Commission has set limits for emit-
ted radio interference, and the AISwitch is constructed with this elec-
tromagnetic interference (EMI) limitation in mind. The AISwitch is
classified under FCC regulations as a Class A device, that is, a device
for use in commercial environments and not in residential areas. This
device has been tested and shown to comply with the following FCC
rule: Part 15 Subpart J. Operation of this equipment in a residential
area may cause interference to radio and TV reception, requiring the
user to take whatever steps are necessary to correct the interference.
Information is available from the FCC describing possible correc-
tive actions. To maintain low EMI levels, we suggest that you use only
metal connectors and shielded cable grounded to the frame.
Electrostatic Discharge Warning
The AISwitch and its peripherals contain electrostatic sensitive
components. Proper handling, shipping, and storage precautions
must be exercised:
z
Removal and installation of circuit boards must be performed in a
static-free environment. This means the technician should wear
an anti-static wrist strip and stand on an anti-static mat. Both the
wrist strap and mat must be grounded at the same point as th
AISwitch enclosure.
z
When not in use, circuit boards must be kept in their anti-static
plastic bags.
z
Circuit boards must only be removed from their anti-static plastic
bags immediately prior to installation into the AISwitch enclosure.
z
Immediately upon removal from the enclosure, circuit boards
must be inserted into their anti-static bags.
z
Do not ship or store the electronic circuit boards near strong elec-
trostatic, electromagnetic, magnetic, or radioactive fields.
Applied Innovation, Inc.
5800 Innovation Drive
Dublin, Ohio 43016-3271
(614) 798-2000
(800) 247-9482
FAX (614) 798-1770