AIS Router AI2524 - Manual (Page 241)

Chapter 11: AI2524 Sync PPP Configuration Steps
August 1997 Page 11-15
2524UM
Configure a Router as a Callback Server
Beginning in global configuration mode, configure a router as a call
back server:
1. Specify the interface and enter interface configuration mode.
interface serial number
2. Enable DDR. Set parity on synchronous serial interfaces and asyn-
chronous interfaces.
dialer in-band [no-parity | odd-parity]
3. Enable PPP encapsulation.
encapsulation ppp
4. Enable CHAP or PAP authentication.
ppp authentication {chap | pap}
5. Map the next hop address to the host name and phone number,
using the name of the map class established for PPP callback on
this interface.
dialer map protocol address name hostname
class classname dial-string
6. (Optional) Configure a dialer hold queue to store packets to be
transferred when the callback connection is established.
dialer hold-queue number timeout seconds
7. (Optional) Configure a timeout period between calls.
dialer enable-timeout seconds
8. Configure the interface to accept PPP callback.
ppp callback accept
9. (Optional) Enable callback security, if desired.
dialer callback-secure
10. Return to global configuration mode.
exit
11. Configure a dialer map class for PPP callback.
map-class dialer classname