AIS Router AI2524 - Manual (Page 326)

AI2524 Router Card User’s Manual
Page 13-10 August 1997
2524UM
2. Specify the subinterface IP address, if needed.
ip address ip-address mask
3. Assign a map group to the subinterface.
map-group group-name
Example: SVCs on a Subinterface
This example configures a point-to-point interface for SVC operation.
This example assumes that the main serial 0 interface has been config-
ured for signalling, and that SVC operation has been enabled on th
main interface.
int s 0.1 point-point
Define the map-group; details are specified under the map-list
holiday command:
map-group holiday
Associate the map-group with a specific source and destination:
map-list holiday local-addr X121 <X121-addr> dest-addr E164 <E164-addr>
Specify destination protocol addresses for a map-class:
ip 131.108.177.100 class hawaii IETF
appletalk 1000.2 class rainbow IETF broadcast
Define a map class and its QOS settings:
map-class hawaii
frame-relay cir in 2000000
frame-relay cir out 56000
frame-relay be 9000