Heading2 - 2.6 connect to the usb interface, Connect to the usb interface -7, 6 connect to the usb interface – ADS Technologies NetDSL 800 ADSL Modem version 5.2b1 User Manual
Page 13
Advertising
Hardware Installation
2-7
2.6 Connect to the USB Interface
Step 1. Plug the Type-B (square-shaped) end of the USB detachable cable
(included) into the USB port of the modem.
Step 2. Plug the Type-A (flat-shaped) end of the USB detachable cable into the
USB port of your PC.
Step 3. Do not turn on the power switch until software installation is
complete. Proceed to Section 3.11 “
Installing the Software Drivers
Figure 2.7 Connecting to the USB Interface
Advertising