ADS Technologies NetDSL 800 ADSL Modem version 5.2b1 - Manual (Page 9)

Hardware Installation
2-3
2.2 Safety First
Personal Safety
• In case of emergency, locate the closest electricity power-off switch.
• Refrain from touching any active wires or terminals.
• Remove jewelry before working on equipment connected to
electricity.
• Keep cables away from walkways.
• Dispose of this product in accordance with national laws and
regulations.
Product Handling
• Keep ventilation slots clear.
• Operate in a clean and dust-free location.
• Cables must be attached to the correct interfaces; to do otherwise may
result in damaging the modem or produce hazardous voltage.
• Do not operate or store the product in an environment that surpasses
temperature or humidity specifications.
2.3 Setup Instructions
Step 1. Choose a location for the NetDSL close to a power outlet and a
telephone line outlet. Preferably select a convenient location that does
not experience too much foot traffic and is away from sunlight.
Step 2. Choose a level surface for the NetDSL – such as a desk top, shelf, or
table.
Step 3. Place the NetDSL on the predetermined surface, so you can see the back
panel.