ADS Technologies NetDSL 800 ADSL Modem version 5.2b1 - Manual (Page 39)

Configuration
5-9
ATM PVC Properties
After typing in the name and clicking OK, the ATM PVC Properties panel will
appear. Note that a maximum of 8 PVCs may be defined. If you double-click on
the icon of a previously created PVC, the ATM PVC Properties panel will also
appear.
Figure 5.6 ATM PVC Properties
The ATM PVC Properties panel allows you to change the name of the selected
ATM interface and to set the values of Virtual Path Identifier (VPI) and the
Virtual Channel Identifier (VCI). The minimum and maximum values of the VCI
are 32 and 4,095, respectively. VCI values from zero to 31 are reserved for well-
known protocols. Note that two ATM connections can have the same VCI value
only if the VPIs are distinct.
Once you have finished setting these parameters, click Apply to review the
parameters you have entered and then click Finish to send settings to the
NetDSL. Click Exit to return to the NetDSL Manager.