ADS Technologies NetDSL 800 ADSL Modem version 5.2b1 - Manual (Page 36)

Configuration
5-6 NetDSL Software User’s Guide
5.4 LAN Configuration
LAN Configuration
From Configuration, use the list in the left panel to open the LAN Configuration
menu.
LAN Configuration assigns the IP address of the modem on your LAN, and
defines the range of IP addresses that the modem can locally access from that IP
Address (its subnet). The LAN Interface can be configured for either a single or
multiple IP address account.
Figure 5.4 LAN Configuration
Single IP Address Account
Selecting Use Default IP Address and Subnet Mask enables your modem to
automatically assign itself a default Private IP Address of 192.168.1.1 with a
Subnet Mask of 255.255.255.0. This will give you an available range of IP
addresses from 192.168.1.2 to 192.168.1.254 that can be assigned to your
network devices. The IP Address and Subnet Mask will be grayed out since you
do not need to enter this information.
You can also opt to de-select Use Default IP Address and Subnet Mask and enter
your own IP Address and Subnet Mask.
If you have an additional subnet in your network you would like the modem to be
able to access, you may provide its IP Address and Subnet Mask under Secondary
IP Address.
Once you have finished setting these parameters, click Apply to review the
parameters you have entered and then click Finish to send settings to the