ADS Technologies NetDSL 800 ADSL Modem version 5.2b1 - Manual (Page 7)

2-1
Hardware
Installation
2222
This Chapter Includes:
2.1 Diagram of the NetDSL .......................... 2-1
2.2 Safety First ............................................. 2-3
2.3 Setup Instructions................................... 2-3
2.4 Connect to the Ethernet.......................... 2-4
2.5 Connect to the ADSL Interface............... 2-6
2.6 Connect to the USB Interface................. 2-7
2.7 Connect to Power ................................... 2-8
2.1 Diagram of the NetDSL
Back Panel Interfaces
Figure 2.1 Back Panel Interfaces for NetDSL
On/Off
Select the On/Off switch to turn the NetDSL on or off.
Power
The power interface connects to the power adapter.
Ethernet
The Ethernet interface connects the NetDSL to a 10BaseT network.
USB
The USB interface allows you to connect your NetDSL to your PC using an USB
detachable cable.
DSL
The ADSL interface connects the NetDSL to an ADSL line.